- UTILITY VEHICLES
- Gator™ Utility Vehicles
- Gator™ UV Attachments
- TOOLS AND NEW PRODUCTS
- Home & Workshop Products
- New Products & Solutions
- Snow Removal Equipment
Aercore™ 2000Aerator
- 77.5-inch coring swath
- Fiberglass reinforced belts
- Six tine options to choose from
- Simple maintenance
Features
Expand All
Collapse All
Productivity
Belt drive system
Tine holders
Aercore™ 1000 service access
Park stands
Productivity
Productivity
Productivity for aeration equipment is measured in two ways:
- Square feet per hour
- The number of holes per square foot
The Aercore™ models excel in both areas. All of these aerators can pull as many as 30 cores per square foot. The number of holes per square foot is a variable number based on the ground speed of the tractor. Most competitors try to quote high numbers of square feet per hour.
Simple drive system
Belt drive system
The Aercore™ 2000, 1500, and 1000 use the same belt-driven design, which provides a quiet, smooth operation that does not require lubrication. A matched pair of fiberglass-reinforced belts provides long life and requires minimal adjustments.
Even the occasional belt replacement is made easy by having all the belt drive components located on top of the machine, where they are easily accessible. All the drive components are easily located for daily checks and routine maintenance. The entire drive assembly utilizes sealed bearings, so there is no need for daily lubrication.
Tine holders
Tine holders
Four sizes of tine holders are available for the Aercore™ aerators; the choice is determined by the turf's needs:
- 4X tine holders are suited for those who want larger tines that have the closest-possible side-to-side hole spacing. The 4X tine holders have a hole spacing of 2.4 in. (61 mm). There are two 4X tine holders—one for tines with a 7/8-in. (22.2-mm) mounting diameter and one for tines with a 3/4-in. (19.0-mm) mounting diameter.
- 3X tine holders are also for larger tines, but at a wider spacing. The 3X tine holders have a spacing of 3.2 in. (81.3 mm). There are also 3X tine holders—one for tines with a 7/8-in. (22.2-mm) mounting diameter and one for tines with a 3/4-in. (19.0-mm) mounting diameter.
- Mini tine holders are for those who want to poke a lot of small holes. Mini tine holders provide a hole spacing of 1-3/8 in. (34.5 mm). The mini tine holder is compatible with tines that have a 3/8-in. (9.65-mm) mounting diameter.
- Needle tine holders are for making the smallest-possible hole when aerating greens. Disruptions of play can be minimized by not having to pick up cores after aeration. Needle tine holders provide a hole spacing of 1-3/8 in. (34.5 mm). The needle tine holder is compatible with both the 0.20-in. (5-mm) and 0.31-in. (8-mm) tines. NOTE: These holders are for the L-shaped needle tines.
| Attachment number | Attachment description | Required quantities | ||
| 1000 | 1500 | 2000 | ||
| BTC10180 | (2) 4x tine holders for tines with 3/4-in. (19-mm)mounting diameter | 2 | 3 | 4 |
| BTC10181 | (2) 4x tine holders for tines with 7/8-in. (22.2-mm) mounting diameter | 2 | 3 | 4 |
| BTC10182 | (2) 3x tine holders for tines with 7/8-in. (22.2-mm) mounting diameter | 2 | 3 | 4 |
| BTC10183 | (2) mini tine holders | 2 | 3 | 4 |
| BTC10184 | (2) needle tine holders | 2 | 3 | 4 |
| BTC10185 | 3x turf guard base kit | 1 | 1 | 1 |
| BTC10186 | 3x turf guard add kit for 1500, 2000 | 1 | 2 | |
| BTC10187 | 4x turf guard base kit | 1 | 1 | 1 |
| BTC10188 | 4x turf guard add kit for 1500, 2000 | 1 | 2 | |
| BTC10189 | Needle/mini tine base kit | 1 | 1 | 1 |
| BTC10190 | Needle/mini tine add kit for 1500 | 1 | 2 | |
*Part numbers in kit descriptions do not include hardware
Serviceability made easy
Aercore™ 1000 service access
Serviceability is a key issue on aeration equipment, and the Aercore 1000, 1500, and 2000 have the best service access in the industry. As the photo illustrates, with the cover lifted up, the drive assembly is readily accessed.
The entire tine ram assembly can be removed in a matter of minutes by removing a single cap screw on the top end and four bolts on the rear frame. Tines can easily be changed from the rear of the machine in minutes, as well.
Access to the tine holders is also achieved from the rear of the machine, making it very convenient to alter the hole spacing with a different set of tine holders. Belt changes can be easily accomplished because they are readily accessible.
Park stands
Park stands
The park stand design allows quick and easy removal of the park stands for aerification and easy attachment for storage. No tools are needed to remove and attach the improved park stands.
These park stands are standard equipment according to the follow serial number ranges and are retrofittable to prior machines:
-
1000 Aercore™ - TC1000X045001 and above
-
1500 Aercore - TC1500X045001 and above
-
2000 Aercore - TC2000X015001 and above
Specs & Compare
Add Model
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere Aercore™ 2000 Aerator |
Key Specs
| Productivity | 2.4 x 2.0-in. (30 x 50 mm) 3722 sq m/hr 40,026 sq ft/hr 2.4 x 2.5-in. (30 x 64 mm) 4653 sq m/hr 50,033 sq ft/hr 2.4 x 3.0-in. (30 x 76 mm) 5584 sq m/hr 60,040 sq ft/hr 2.4 x 4.0-in. (30 x 101 mm) 7445 sq m/hr 80,053 sq ft/hr 2.4 x 4.5-in. (30 x 111 mm) 8376 sq m/hr 90,059 sq ft/hr 2.4 x 5.0-in. (30 x 127 mm) 9306 sq m/hr 100,066 sq ft/hr |
|||
|---|---|---|---|---|
| Coring width | 190.6 cm 77.5 in. |
|||
| Coring depth | Up to 100 mm 4 in. |
Machine
| Coring width | 190.6 cm 77.5 in. |
|||
|---|---|---|---|---|
| Coring depth | Up to 100 mm 4 in. |
|||
| Hole pattern | Option 1 With 4X tine holders, variable 61x51-127 mm 2.4x2.0-5.0 in. Option 2 With 3X tine holders, variable 81.3x50-125 mm 3.2x2.0-5.0 in. |
Productivity
| 2.4 x 2.0-in. (30 x 50 mm) | 3722 sq m/hr 40,026 sq ft/hr |
|||
|---|---|---|---|---|
| 2.4 x 2.5-in. (30 x 64 mm) | 4653 sq m/hr 50,033 sq ft/hr |
|||
| 2.4 x 3.0-in. (30 x 76 mm) | 5584 sq m/hr 60,040 sq ft/hr |
|||
| 2.4 x 4.0-in. (30 x 101 mm) | 7445 sq m/hr 80,053 sq ft/hr |
|||
| 2.4 x 4.5-in. (30 x 111 mm) | 8376 sq m/hr 90,059 sq ft/hr |
|||
| 2.4 x 5.0-in. (30 x 127 mm) | 9306 sq m/hr 100,066 sq ft/hr |
Tine Sizes, Tubular
| Option 1 | 25.4 mm 1 in. |
|||
|---|---|---|---|---|
| Option 2 | 19 mm 3/4 in. |
|||
| Option 3 | 16 mm 0.625 in. |
|||
| Option 4 | 12.7 mm 0.5 in. |
|||
| Option 5 | 10 mm 0.375 in. |
Tine Sizes, Open Side
| Option 1 | 25.4 mm 1 in. |
|||
|---|---|---|---|---|
| Option 2 | 0.875 in. 22.23 mm |
|||
| Option 3 | 20.64 mm 0.813 in. |
|||
| Option 4 | 0.75 in. 19 mm |
|||
| Option 5 | 0.625 in. 16 mm |
|||
| Option 6 | 12.7 mm 1/2 in. |
|||
| Option 7 | 10 mm 0.375 in. |
|||
| Option 8 | 0.25 in. 6.35 mm |
Tine Sizes, Solid
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | 16 mm 0.625 in. |
|||
| Option 3 | 10 mm 0.375 in. |
|||
| Option 4 | Cross with rib: 12.7 mm 0.5 in. |
|||
| Option 5 | Super Cross with rib: 19 mm 0.75 in. |
Dimensions
| Weight | 772 kg 1728 lb |
|||
|---|---|---|---|---|
| Height | 990 mm 39 in. |
|||
| Width | 2177 mm 85.7 in. |
|||
| Length | 845 mm 33 in. |
Additional information
| Date collected |
|---|
Shop and Buy
Maintenance and Support
You May Also Be Interested In
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact your local John Deere dealer for more information.